The Most Powerful Automation | Energy Management | IoT Platform In the World
Polisy OS SSD
$26.00
Update your Polisy to the latest OS and software effortlessly! Just swap in this upgraded internal SSD, restore your backup, and you’re all set: quick, easy, and hassle-free.
Update your Polisy to the latest OS and software effortlessly! Just swap in this upgraded internal SSD, restore your backup, and you’re all set: quick, easy, and hassle-free.
Steps:
Save your settings: Make a backup of your IoX and PG3 plugins.
Turn it off: Unplug your Polisy from power.
Open it up: Remove the cover of the unit.
Remove the small board: Carefully take out the tiny board sitting above the storage drive (on the right, labeled TPM in the picture).
Take out the old drive: Gently release the clips holding the drive and slide it out.
Insert the new drive: Slide the new drive in and gently press it down until the clips lock it in place.
Put the small board back: Carefully reinstall the tiny TPM board you removed earlier and make sure all pins are connected (very important).
Close it up: Put the cover back on.
Power it back on: Plug in your Polisy and turn it on.
Restore your settings: Use your IoX and PG3 backups to get everything back just the way it was.
Polisy OS SSD
$26.00
Update your Polisy to the latest OS and software effortlessly! Just swap in this upgraded internal SSD, restore your backup, and you’re all set: quick, easy, and hassle-free.
In stock
Description
Update your Polisy to the latest OS and software effortlessly! Just swap in this upgraded internal SSD, restore your backup, and you’re all set: quick, easy, and hassle-free.
Save your settings: Make a backup of your IoX and PG3 plugins.
Turn it off: Unplug your Polisy from power.
Open it up: Remove the cover of the unit.
Remove the small board: Carefully take out the tiny board sitting above the storage drive (on the right, labeled TPM in the picture).
Take out the old drive: Gently release the clips holding the drive and slide it out.
Insert the new drive: Slide the new drive in and gently press it down until the clips lock it in place.
Put the small board back: Carefully reinstall the tiny TPM board you removed earlier and make sure all pins are connected (very important).
Close it up: Put the cover back on.
Power it back on: Plug in your Polisy and turn it on.
Restore your settings: Use your IoX and PG3 backups to get everything back just the way it was.
Additional information
You may also like…
eisy | home
$352.00 Add to cartRelated products
Serial PLM Kit
$26.00 Add to cartZMatter USB: Z-Wave+, Zigbee, and Matter Module for eisy (Z-Wave+ Certified – Long Range)
$152.00 Add to carteisy Reflash USB Stick
$18.00 Add to carteisy + Installation Support
$499.00 Add to cart